UserGuide - Bush -50-211F Home Mode.indd 1 11/8/2013 3:54:30 PM
50/238F
Full HD LED TV with Freeview HD & USB Media Player
Model No
User Guide
4
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Important Safety Instructions
• To reduce the risk of fi re, electric shock or
damage to the television, do not expose it to dust,
rain or moisture, or place any objects fi lled with
liquids on or near the television.
• Do not place the television in a confi ned space.
Ensure that nothing can obstruct the ventilation
openings at the rear of the television.
• Dispose of this television and any components
including batteries in an environmentally friendly
manner. If in doubt, please contact your local
authority for details of recycling.
• For your safety, this appliance is fi tted with a
fused moulded 3 pin mains plug. Should the
fuse need to be replaced, ensure that any
replacement is of the same amperage and
approved with the BSI mark.
• The television should be connected to a
main socket outlet with a protective earthing
connection.
• Never try and replace the mains plug unless
you have adequate qualifi cations and are
legally authorised to do so. In the event that a
replacement Mains cable is required, contact the
manufacturer for a suitable replacement.
• Never use the television if it is damaged in
any way.
• Always place the television on a fl at level surface
avoiding anywhere which may be subject to
strong vibration.
• Ensure the television is not placed on top of the
power cable as the weight of the television may
damage the cable and cause a safety hazard.
• Never place mobile phones, speakers or any
other device which may cause magnetic or radio
interference with the television. If interference
is apparent, move the device causing the
interference, near the television.
• To disconnect the apparatus from the mains,
please use the mains plug located on the
underside/rear of the TV. The mains plug shall
remain readily operable.
• Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fi re or the like.
• Install the product at least 5cm from the wall for
ventilation.
• Ensure that the power switch on the unit and the
mains plug are always easily accessible.
WARNING: Excessive noise when using earphones
and headphones can cause loss of hearing.
• To clean this unit, wipe with a soft, dry cloth. If
the surfaces are extremely dirty, use a soft cloth
dipped in a soap and water solution or a mild
detergent solution.
• Never use alcohol, paint thinner
or benzene to clean this unit.
• Before using a chemically treated
cloth, read the instructions that
came with the cloth carefully.
CAUTION: If water or other liquid enters the television
through the display panel surface or back cover a
malfunction may occur.
• The safest way to transport your item is in
the original box/packaging - please save your
packaging for this.
• You will need original box/packaging in the event
of warranty/service repair or support. We are
unable to carry out warranty/service if you are
unable to package the item correctly.
To prevent the spread of fi re, keep
candles or other open fl ames away
from this product at all times
IMPORTANT - Please read these instructions. All the safety and operating instructions
should be read before the appliance is operated.
Warnings
Safety
Maintenance
Packaging
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:4User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:4 12/16/2014 10:12:50 AM12/16/2014 10:12:50 AM
5
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
Batteries
How do I dispose of this product?
Important Safety Instructions
Important Information - Regarding Use of
Video Games, Computers, Captions or Other
Fixed Image Displays
The extended use of fi xed image program material
can cause a permanent “shadow image” on the
LCD/LED panel.
This background image is viewable on normal
programs in the form of a stationary fi xed image. This
type of irreversible LCD/LED panel deterioration can
be limited by observing the following steps:
1. Reduce the brightness/contrast setting to a
minimum viewing level.
2. Do not display the fi xed image for extended
periods of time.
3. Turn the power off when not in actual use.
Examples of images that you need to watch out for
are as follows (this is not an exhaustive list):
• TV Channel Logos: e.g. Shopping channel logos
and pricing displays-especially if they are bright
and stationary.
• Moving or low contrast graphics are less likely to
cause ageing of the screen.
• Time Displays
• Teletext: Do not view a stationary page for a long
period of time
• TV/DVD Menus: e.g. Listings of DVD disc content
• Pause Mode: Do not leave the TV in pause mode
for long periods of time, e.g. When watching
DVDs or videos.
Important - Once ‘shadow image/screen burn’
occurs, it will never disappear and is not
repairable under warranty.
UK: Waste electrical products should not be disposed
of with household waste. Separate disposal facilities
exist. For your nearest facilities, please see
www.recycle-more.co.uk or in store for details.
ROI: Waste electrical products should not be
disposed of with household waste. Separate disposal
facilities exist. Check with your Local Authority or
retailer for recycling advice.
• Do not expose batteries to high
temperatures, excessive heat,
prolonged sunshine or fi re as
this may cause leakage, explosion
or ignition.
• Observe the correct polarity when
inserting batteries.
• Do not use different types of
batteries together or mix old and
new batteries.
• Dispose of batteries in an
environmentally friendly way.
• Certain regions may regulate the
disposal of batteries.
Please consult your local authority.
Cd
IMPORTANT - Please read these instructions. All the safety and operating instructions
should be read before the appliance is operated.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:5User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:5 12/16/2014 10:12:50 AM12/16/2014 10:12:50 AM
7
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Contents
Manufacturers Guarantee Information 3
Important Safety Instructions 4-5
What is included in the box 9
Attaching the stand 10
Detaching the stand and securing the TV
to a wall 11
Wall mounting 12
Getting Started - Initial Set Up 13
Remote Control 15
TV Buttons and Input Source Menu 16
Connections 17-19
TV Menu Operation 21-27
Channel Menu 21
Picture Menu 22-23
Sound Menu 24
Time Menu 25
Setup Menu 26
Lock Menu 27
Network Confi guration 29
7 Day TV Guide and Channel List 30
USB Record Digital / Freeview 31
USB Mode / Media Player 32
General Information 33-37
Using your TV with a Sky digital set top box 33
Frequently Asked Questions 34-35
Technical Specifi cations 36-37
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:7User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:7 12/16/2014 10:12:50 AM12/16/2014 10:12:50 AM
9
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Please save your packaging as you will need this in the event of warranty/service repair or support. We are
unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your
item in the event of warranty/service repair is in it’s original box/packaging.
1 x User Guide
1 x Quick Start Guide
1 x RF Cable
1 x Remote Control & 2 x AAA Batteries
User Guide
QSG
What Is Included In The Box
Accessories
Included with this TV are the following accessories:
1 x TV
1 x Stand Installation Pack
1 x Mini-AV cable
1 x SCART to Mini AV cable
(B) 4 x M (4x(10+8))
(A) 4 x M(4x16)
Used for attaching the stand
neck to the TV
Used for attaching the wire
stand to the stand neck
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:9User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:9 12/16/2014 10:12:51 AM12/16/2014 10:12:51 AM
The Stand Installation pack comes with two different
types of screws.
fi g 1) Attach the stand neck to the rear of the TV set.
fi g 2) Secure the neck to the TV using the
(A) 4 x M (4x16) screws provided.
fi g 3) Attach the wire base to the stand neck.
fi g 4) Secure the wire stand to the neck using the
(B) 4 x M (4x(10+8)) screws provided.
10
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
To complete the stand installation you will require a cross head screw driver.
Attaching The Stand
(B) 4 x M (4x(10+8))
4 x M(4x16)
4 x M(4x(10+8))
1
2
3
4
(A) 4 x M(4x16)
HELPFUL ADVICE FOR FIRST TIME STAND INSTALLATION
When securing the self-tapping screw/s into the base of the stand (on fi rst installation) the screw/s will be
naturally tight as they create a thread in the plastic of the stand neck in order to support a TV of this size.
a) Ensure the cross head screw driver tip fi ts correctly into the head of the
screw and that it is not too big or small.
b) Screw in all screws individually and partially before tightening all of the
screws fully.
c) If they become very tight try loosening them slightly and then re-tightening them once again as this will
continue the process of creating the thread for the screws.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:10User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:10 12/16/2014 10:12:59 AM12/16/2014 10:12:59 AM
11
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Detaching the stand and securing the TV
to a wall
Detaching the Stand
Securing the TV to a Wall
4 x M(4x16)
For maximum security in the home when using a TV with its stand anti-tip straps should be fi tted. These are
available from supermarket websites and other websites and are an easy, inexpensive and effective way of
ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and then tethered to
the wall of the furniture the TV is stood on.
The Royal Society for the Prevention of Accidents is urging people to take care with fl at-screen televisions.
RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling fl at-screen televisions on to themselves. They
are unsteady on their feet and are attracted by colourful television images.”
The risk is increased as televisions become lighter.
A) Using one or both of the top wall-mounting holes
and screws (the screws are already supplied in the
wall mounting holes) fasten one end of the
fastening cord/s to the TV.
B) Secure the other end of the fastening cord/s to
your wall. (you will need screws/fi xings suitable for
your wall type - available separately from most
DIY stores)
Note - Please ensure that children do not climb on the
TV set.
To detach the stand please remove the 4 screws
highlighted then remove the stand neck and base
from the rear of the TV set.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:11User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:11 12/16/2014 10:13:00 AM12/16/2014 10:13:00 AM
12
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there could be any electric wires, water or
gas pipes.
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes are
indicated in the picture below.
For optimum viewing, if wall mounting the TV higher
than eye level, the TV should be tilted downwards so
that the TV’s screen is ‘face on’.
See fi g 1 and 2 below.
IMPORTANT – If wall mounting this TV, only use the
screws already provided in the wall mounting holes.
Using other screws which are longer could cause
irreparable damage to internal parts.
TV
fi g 1
fi g 2
Viewing angle
Viewing angle
INCORRECT
CORRECT
TV
Wall Mounting
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:12User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:12 12/16/2014 10:13:00 AM12/16/2014 10:13:00 AM
13
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
2
Power on/off
Getting Started - Intial Set Up
3
1
Fig A
Fig B
4
5
1) Using the RF cable supplied, connect the TV to the
TV Aerial wall socket (Fig A).
Connect the power cable to the Electrical outlet
(Fig B).
2) Switch on the television using the power on/off
switch located on the side/underside of the TV.
3) Insert the batteries supplied into the Remote
control and press the Standby button to power on the
TV.
4) You will now be welcomed with the initial set-up
screen. If it does not appear, on the remote control,
please press [MENU] then 8-8-8-8 and the menu will
appear. Press OK on the remote control and tuning
will start.*
5) After tuning the following screen will appear.*
If you are missing channels, the reason for this is
likely to be signal strength, you should consider
connecting signal booster and re-tuning the TV.
* Screen shots/images are shown for illustration
purposes only and may change dependent on
model/region.
Important
As part of our ongoing development to reduce power
consumption, we have added an extra function to
this Television called ‘Home Mode’ (you will see
this during the fi rst time installation set up). Power
consumption using the Home Mode function is
approximately 25% lower than some other modes.
The picture brightness is reduced using the Home
Mode function. If this function is not suitable for your
viewing environment, you can select other modes as
necessary. (Please note, ‘Store mode’ is for optimum
default picture settings, however, power consumption
is approximately 25% higher than ‘Home Mode’).
Please refer to the user guide section ‘Picture
settings’ in order to change the mode to one that
maybe more suitable for your environment. There
is also a shortcut button on the remote control
called ‘P-Mode’ should you wish to change to
another mode.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:13User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:13 12/16/2014 10:13:01 AM12/16/2014 10:13:01 AM
15
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
1. STANDBY
2. MUTE
3. DTV
4. RADIO
5. DVD
6. USB
7. NUMBER BUTTONS
8. TV GUIDE
9. - To return to the previous channel viewed
10. P.MODE - Scrolls through picture mode options
11. VOL
12. CH
13. S.MODE - Scrolls through sound mode options
14. FAV - To display favourites menu
15. MENU
16. EXIT
17.
- Allows you to navigate the
on-screen menus and adjust the system settings
to your preference
18. SOURCE/AV
19. INFO - Press once for now/next channel
information. Press twice for programme
information about current programme
20. ASPECT
21. SLEEP
22. SUBTITLE
23. AUDIO
24. TEXT
25. TEXT HOLD
26. DISPLAY
27. TEXTZOOM/DVD ZOOM
28. DVD Menu/Record
- To restart the current chapter
- To advance forward to the next chapter
- To stop/eject Disc
(hold for 4 seconds to eject disc)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
29. REC LIST
30. GOTO
31. A-B
32. REPEAT
33. ANGLE/
3D - Change to 3D mode
For Models with Integrated DVD players
For Models with PVR Function
For Models with USB Playback
For Models with 3D Feature
Remote Control
Viewing remote control - TV
1
35
4
7
8
10
11
12
13
15
17
18
20
22
24
26
28
29
21
23
25
27
30
31
32
33
19
16
14
9
6
2
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:15User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:15 12/16/2014 10:13:02 AM12/16/2014 10:13:02 AM
1
2
3
4
5
6
7
16
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
TV Buttons and Input Source Menu
To switch between the different input/connections.
A) Using the buttons on the remote control:
1) Press [SOURCE] - The source menu will appear.
2) Press [\/] or [/\] to select the input you require.
3) Press [OK].
B) Using the buttons on the Television:
1) Press [SOURCE].
2) Scroll up / down using CH+/ CH- buttons to the
input/source you require.
3) Press Vol+ to change input/source to the one
selected.
Choosing Mode Input/Source
Example of Source menu
depending on the TV model
1. Displays the input source menu
2. Programme/Channel up and menu up
3. Programme/Channel down and menu down
4. Volume up and menu right
5. Volume down and menu left
6. Displays Menu/OSD
7. Standby Power On/Off
Component / YPbPr
Freeview TV
Composite/AV
VGA/PC
USB Media
Analogue TV
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:16User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:16 12/16/2014 10:13:03 AM12/16/2014 10:13:03 AM
VGA/PC(Audio in)
VGA/PC IN
Y
Pb
Pr
AV IN
USB
CI CARD IN
EARPHONE
Digital Audio
Output
*The LAN/Ethernet port is used only for Freeview
HD/Pay TV services. It is not intended to be used for
internet/network use.
17
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Connections
LAN Network Connection
HDMI 1 HDMI input
HDMI 2 HDMI input
COMPONENT (HD) Component input (YPbPr)
VGA PC Audio In 3.5mm PC audio input
VGA PC VGA-PC input
RF IN RF / TV Aerial Input
HDMI 3 HDMI input
CI CARD IN Common Interface module
AV IN Audio Video Input
USB USB Input
EARPHONE Earphone Socket
Digital Audio Digital Optical Audio Output
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
56
7
8
9
10
12
13
11
4
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:17User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:17 12/16/2014 10:13:09 AM12/16/2014 10:13:09 AM
18
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
L (white)
R (red)
AV (Yellow)
Mini
AV IN
Connections
Source should be set to Composite/AV
A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio
with minimal loss of quality.
Source should be set to the corresponding HDMI Port (HDMI 1, HDMI 2, etc)
Connecting a Camcorder, Camera or Games Console
Connecting a High Defi nition (HD) Device
Option 1 - via HDMI to HDMI cable
Note: This model TV can not be used as a PC/laptop monitor via HDMI input. The HDMI Input is provided to view
digital content with compatible external devices..
SCART
Mini
AV IN
Source should be set to Composite/AV
Connecting a DVD Player/Recorder, Video Recorder or Cable/Satellite Box
Note: Connecting cables are shown for example only and may not be included. Please check ‘What Is Included In
The Box’ page.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:18User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:18 12/16/2014 10:13:10 AM12/16/2014 10:13:10 AM
VGA/PC
IN
VGA/PC
OUT
VGA/PC
(AUDIO
IN)
AUDIO
OUT
Ethernet
Port
Ethernet
Port
Y
PB
PR
Y
PB
PR
Mini
AV IN
L
R
Video (yellow)
is not connected
Connections
Source should be set to VGA/PC
The Ethernet port is used only for Freeview HD/Pay TV services. It is not intended to be used for
internet/network use.
If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE
connectors you must connect via Component (for picture) and by phono cable (for sound).
TV Source should be set to Component/YPbPr
Connecting a High Defi nition (HD) Device
Option 2 - via Component cable
Connecting to a device with VGA/PC output (Laptop or Desktop Computer)
Connecting an Ethernet/Network cable
3.5mm
EARPHONE
OPTION 1 for 3.5mm EARPHONE Output
OPTION 2 for Digital Optical Audio Output
DIGITAL
AUDIO
OUT
(OPTICAL)
3.5mm
AUDIO
IN
DIGITAL
AUDIO
IN
(OPTICAL)
When connecting via the TV’s 3.5mm Earphone output, this will disable the TV speakers.
There are two options when connecting a device via the 3.5mm Earphone Output and the Digital Optical
Audio Output
Connecting to an external audio device (Amplifi ers, Surround Sound,
Sound Bars etc)
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:19User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:19 12/16/2014 10:13:11 AM12/16/2014 10:13:11 AM
21
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Tip: If you do not press any buttons for 30 seconds,
the menu will automatically exit. You can change the
length of time before the menu exits automatically -
see ‘OSD Timer’ in the Time Menu.
Important:
To receive Freeview channels, in particular
Freeview HD channels, you will need a Digital TV
aerial and be in a good Freeview coverage area.
You can check coverage for your postcode at
www.freeview.co.uk
Please note that any Freeview HD channels
found during tuning will be placed in channel
positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
Auto Tuning
Allows you to retune the television for all digital
channels, digital radio stations and analogue
channels.
Freeview Manual Tuning
Allows you to manually tune your digital signal
Analogue Manual Tuning
Allows you to manually tune your analogue signal
Channel Edit
Allows you to delete, move, skip and add
favourite channels.
Signal Information
Displays signal strength information
CI Information
Pay per view services require a “smartcard” to be
inserted into the TV. If you subscribe to a pay per
view service the provider will issue you with a ‘CAM’
and a “smartcard”. The CAM can then be inserted
into the COMMON INTERFACE PORT (CI Card In).
Schedule List
Lists your programme reminders
Software Update (OAD)
Switch on/off OAD updates
To access this menu, press [MENU] button on the
remote control. To enter a menu press [OK]
If you wish to make changes to any of the default
settings, use the scroll
buttons. To confi rm
any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
Channel Menu
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:21User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:21 12/16/2014 10:13:12 AM12/16/2014 10:13:12 AM
22
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Picture Mode
• Dynamic - Recommended settings for fast
moving pictures
• Standard - Default settings
• Mild - Set to be lighter in colour and less
bright
• Personal - Lets you manually alter all the
settings
• Economy - Power saving mode which reduces
the energy used by up to 25% (by reducing the
power to the LED/LCD panel). In Economy mode,
the TV will switch itself to Standby mode after 3-5
hours in the event that the TV buttons or remote
control buttons are not pressed (change the
picture mode to another setting to de-activate
this function)
Contrast
Switch the balance between black and white
Brightness
Increase or decrease the brightness of the picture
Colour
Increases the colour from black and white
Tint
Lets you increase or decrease the level of tint within
the picture (only available in VGA/PC source mode).
Sharpness
Increase or decrease the sharpness of the picture
Colour Temperature
• Normal - Default settings
• Warm - Increases red within the picture
• Cool - Increases blue within the picture
Picture Menu
To access this menu, press [MENU] button on the
remote control and scroll right.
To enter a menu press [OK]
If you wish to make changes to any of the default
settings, use the scroll
buttons. To confi rm
any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:22User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:22 12/16/2014 10:13:12 AM12/16/2014 10:13:12 AM
23
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
• 16:9 - Fills the screen with a regular 16:9 signal
and 4:3 will stretch to fi ll the screen
• 4:3 - Displays the 4:3 picture in its original size.
Side bars are shown to fi ll the 16:9 screen
• 14:9 - Displays the 14:9 picture in the correct
proportion. As a result side bars are shown on
the screen
• Zoom1 and Zoom 2 - The picture is the correct
proportion but zoomed in to fi ll the screen
Picture Menu
Aspect Ratio
Within the UK the picture format varies depending
on the channel/broadcast. There are a number of
different options to best meet your needs
• Point2Point
Automatically displays the best picture format. So
the picture is in the correct position. May have
black lines at the top/bottom and/or sides.
• Original - Will display the picture from the
broadcaster without any change
Noise Reduction
• Off - Turns noise reduction off
• Low - Minor system adjustment
• Middle - Medium system adjustments
• High - Maximum system adjustments
Screen
Allows you to adjust screen settings when TV
is used a PC monitor and the TV is set to the
VGA/PC source.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:23User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:23 12/16/2014 10:13:12 AM12/16/2014 10:13:12 AM
24
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Sound Mode
• Standard - Default settings
• Music - Emphasises music over voices
• Movie - Provides live and full sound for movies
• Sports - Emphasises sound for sports
• Personal - Selects your personal sound settings
Balance
To switch the so und between the left and right
speakers
Auto Volume Level (AVL)
When ‘on’ is selected, the volume will stay at a
constant level regardless of input/source
Surround Sound
• Off - Off
• TruSurround HD - TruSurround HD™ creates
an immersive, feature-rich surround sound
experience from two speakers, complete with
rich bass, high frequency detail and clear dialog
Audio Description
This allows the user to increase and decrease the AD
(Audio Description) volume level.
(Audio Description is a service available on certain
programmes. It provides a description of what is
happening during the selected programme for a
person who is visually impaired)
Digital Output
• Off - Off
• Auto - Selects the best settings automatically
• PCM - Select this option if you are connecting
to a Stereo Hi-fi via coax cable (Pulse-code
modulation (PCM) is a digital representation of an
analogue signal)
Audio Delay
Enables the user to adjust setting to sync picture
and audio
Tip: Treble and bass levels can only be adjusted
when the sound mode ‘Personal’ is selected.
Sound Menu
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:24User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:24 12/16/2014 10:13:13 AM12/16/2014 10:13:13 AM
25
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Clock
Shows the date and time
Time Zone
Change your current time zone
Sleep Timer
Lets you set the sleep timer so the television
automatically switches off after a set amount of time.
Off -> 10min -> 20min -> 30min -> 60min -> 90min ->
120min -> 180min -> 240min
OSD Timer
Lets you adjust the amount of time the On Screen
Menu stays on the screen before disappearing
Auto standby
Set Auto standby between 3 hours, 4 hours and
5 hours ( to turn off this function you must exit Home
Mode in the Picture Menu)
Time Menu
To access this menu, press [MENU] button on the
remote control and scroll right.
To enter a menu press [OK]
If you wish to make changes to any of the default
settings, use the scroll
buttons. To confi rm
any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:25User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:25 12/16/2014 10:13:14 AM12/16/2014 10:13:14 AM
26
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Setup Menu
Language
Allows you to change the language of the menu
Audio language
Allows the user to change the audio language
Subtitle Language
Allows the user to change the subtitle language
Hearing Impaired
This allows the user to turn on the Hearing Impaired
function, this produces subtitles on the screen which
provide a description of what is happening during the
selected program.
PVR File System
Allows you to view the format and performance of a
USB key
Blue Screen
Changes the background when there is no input
between clear and a blue background (Only available
on some sources)
Network Confi guration
Allows you to manually set your network settings on
the TV (for more information please see ‘Network
Confi guration’ page
First Time Installation
Allows you to retune the television for all digital
channels, digital radio stations and analogue
channels
HDMI CEC (Consumer Electronic Control)
Allows HDMI devices to control each other and allows
the user to operate multiple devices with one remote
control. (only available with compatible devices)
Software Update (USB)
This menu lets you install the new software/fi rmware
onto the television. Further details of how to do this
will be issued with the fi rmware. Contact the helpline
or refer to the ‘product support’ section of the website
Reset TV
This resets the menus to factory settings and will
erase all TV channels stored on the television
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:26User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:26 12/16/2014 10:13:14 AM12/16/2014 10:13:14 AM
27
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
System/Hotel Lock
Allows you to lock or unlock the menu. You will be
asked to enter a 4 digit password use the button to
quit the password input. Use the button to clear.
Default password is 0000
Change Password
Allows you to change the password
Channel Lock
Allows you to lock certain channels manually
Parental Guidance
Allows you to set the rating to block certain content
based on age information
TV Button Lock
Allows you to lock the buttons on the side of the
TV set
Default Source
Allows the user to set the default source. The default
source is the source the TV starts on when fi rst
switched on
Default Channel
Allows the user to set a channel as the default
channel on the Digital source. The default channel is
the channel the TV starts on when fi rst switched on
Max Volume
Allows you to adjust and set the maximum volume
Source Lock
Allows you to lock the source menu
Lock Menu
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:27User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:27 12/16/2014 10:13:14 AM12/16/2014 10:13:14 AM
29
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Network Configuration
4) 5) 6)
3)
2)
1)
For the network confi guration to work the TV will need to be connected to your home network via an Ethernet
cable, with these requirements in place the TV will connect to the network automatically.
If you are looking to change the confi guration to a static IP address this can be done by following the instructions
below.
1) In the Setup Menu you will need to highlight and select Network Confi guration.
2) When the Network menu appears highlight and select Wired Network.
3) Next the Wired Network menu will appear please highlight and select Confi guration.
4) The Network Confi guration menu allows you to choose between DHCP and Static.
DHCP - will automatically connect the TV to your home network (this is the default setting and is highly
recommended)
Static - is an advanced option and allows you to manually change the IP, Netmask, Gateway and DNS information.
5) If the static option is chosen you will able to scroll down and manually change the IP, Netmask, Gateway and
DNS information.
6) When the connection process is completed with either DHCP or Static option the Success screen will appear.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:29User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:29 12/16/2014 10:13:15 AM12/16/2014 10:13:15 AM
30
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where supported
by the freeview channel). You can view the start and end time of all programmes and on all channels for the next 7
days and set reminders.
1) Press [TV GUIDE]. The following 7 Day TV Guide will appear.
2) Navigate through the menu using
You can now:
Record a programme by pressing RED (USB device must be connected)
View a previous day by pressing GREEN
View the next day by pressing YELLOW
Set a reminder by pressing BLUE
3) Press [EXIT] to exit the 7 day TV Guide.
7 Day TV Guide and Channel List
Channel List
7 Day TV GUIDE
11 Dec 2014 12: 58
1 BBC ONE Oxford
CHANNEL
1 BBC ONE Oxford
2 BBC TWO
3 ITV
4 Channel 4
5 Channel 5
6 ITV2
7 BBC THREE
9 BBC FOUR
12:15 - 13:00 11 Dec 2014
Norfolk: Tim wonnacott and the teams are in Norfolk in search of great buys to take to auction.
Expertise comes from Catherine Southon and Jonathan Pratt, and Tim visits Ham House.
Lifestyle
12:00
Bargain Hunt
Daily Politics The Blue Planet
Let’s Do Christmas with Gino and Mel
Come Dine with Me
Coronation Street
Three Wise Women
You’ve Been Framed! Royal...
This is BBC Three
This is BBC Four
Come Dine with Me
Come Dine...
ITV News & Weather
Jame...
5..
Record
Move
Prev. Day
Info
Next Day
EXIT
Remind
OK
OK
Home and Away
BBC News at One South...
Doctors
13:00 13:30Now
Info. Exit.
To view the channel list, please ensure that the TV is set to either the analogue or digital source and
no menus or TV notifi cations are displayed.
1) Press [OK] on the remote control and the
channel list menu will appear.
2) Scroll through the channel list by using buttons then
press [OK] to view the channel that is currently highlighted.
You can also:
View Freeview HD channels by pressing RED
View standard defi nition Freeview channels by pressing GREEN
View radio channels by pressing YELLOW
View all channels by pressing BLUE
3) Press [EXIT] to exit the channel list.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:30User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:30 12/16/2014 10:13:15 AM12/16/2014 10:13:15 AM
31
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Tip: When you switch the TV to standby or change channel the Time Shift memory is wiped. To restart time shift
you must press play/pause button.
Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or record
one channel while the television is in standby mode.
Note: USB record function is only avilable in Digital/Freeview TV mode. Due to copyright laws and illegal
copying/recording it is not possible to record to/from any other input/output source.
USB Record - Digital / Freeview Mode
USB Record – Digital/Freeview Mode
Pause Live TV (Time Shift)
One Button Record
Minimum Specifi cation - USB Memory Stick
If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear of this
user guide.
Read Speed 20 MB/s (Mega Byte Per Second)
Write Speed 6 MB/s (Mega Byte Per Second)
Built into this television is a USB record facility. This function is available in Digital/Freeview mode when used in
conjunction with a compatible USB memory stick or USB hard drive. The benefi ts of this are as follows:
• Pause live TV and then playback, fast forward and rewind (up to live TV)
• One button record, if you decide you want to record the current programme
• Easy programmable recording from the 7 day TV Guide
• Record TV and watch/listen back on your computer/laptop
Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads
from and writes to the memory stick at the same time, some memory sticks may not be suitable)
You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection
of tested and compatible memory sticks available to purchase directly from the helpline/web site.
Pausing Live TV is very simple.
- Press the play/pause button and the television will pause and the live content will be recorded. To resume
watching press play/pause again.
- Press fast forward to go forward in a recording (i.e. to skip adverts)
- Press fast rewind to go back in a recording (i.e. if you fast forwarded too far)
At any point in time you may decide to record the current channel that you are watching. To do this you need to
press the red button highlighted below.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:31User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:31 12/16/2014 10:13:15 AM12/16/2014 10:13:15 AM
32
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
USB mode offers playback of various different types
of content that you have saved on your USB Memory
Stick.
On switching to USB source the menu screen will
appear. The content will be divided into Photo,
Music, Movie and Text based on fi le type.
1) You can navigate through the menus using the
scroll buttons. To confi rm the item you wish
to play/view press [OK] button.
2) Select the drive you require.
(If your drive only has 1 partition you will only see
1 item).
3) You can now access the item. Press OK to view.
4) While viewing you control the item using (Fig A)
or by pressing ( i ) and using and (OK)
USB Mode / Media Player
Fig A
4)
3)
2)
1)
Tips:
• If you experience a playback issue, please
ensure the fi les being used are the correct format
(example - the picture plays but no sound).
• For best performance, do not use USB
extension cable.
See technical specifi cation page for compatible
fi le types.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:32User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:32 12/16/2014 10:13:16 AM12/16/2014 10:13:16 AM
33
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Using Your TV With a Sky Digital Set Top Box
Depending on your Sky Box & TV model, connect either by SCART or HDMI
cables (available separately).
If connecting by SCART, select the ‘Input source’ on the TV as Composite/AV.
If connecting by HDMI, select the ‘Input source’ on the TV as HDMI (if the TV has
more than 1 HDMI port, ensure you select the input source to match the HDMI
numbered port on the rear of the TV).
If you wish to use your Sky remote to operate the TV’s functions, you will need a
Sky remote control (Revision 9 or later) and you will need to programme a 4 digit
code into it. See bottom of this page.
Please note, if you are adding a ‘Magic Eye/TV Link’
to your system so that you can use your Sky remote
control to change the Sky channel in the room where
the 2nd TV is located, please refer to the instructions
included with the TV link/magic eye in order to
ensure the RF or RF2 output on your Sky box is
powered on. (The red LED light on the TV link/magic
eye will light up if the RF / RF2 output is correctly
set up) If you do not have the instructions that came
with the TV link/magic eye, instructions on how to do
it can be found on our web site.
1) To tune the TV to the Sky box, on the 2nd TV, select the ‘Analogue’ input source.
2) Select the channel that you wish to store the Sky box/channel on. (If you do not use channels 1-5 because you
no longer have analogue terrestrial channels after digital switchover, you may choose to select channel 1 to store
the Sky box/channel, if you still have and use analogue channels 1-5, you may for example decide that channel 6 is
the best option for you)
3) Press the corresponding number on the remote control to select the desired analogue channel chosen as per
point 2 above.
4) On the TV remote control, press Menu. Now navigate through the menus to select Manual Tuning or Analogue
Manual tuning (refer to the Tuning/Channel menu section of this user guide if necessary)
5) Manually tune in the channel (usually, the Sky box is at a frequency between 800Mhz and 850Mhz) once the
Sky box/channel is found, press ‘OK’ to store it.
If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky remote control
(Revision 9 or later) and you will need to programme a 4 digit code into it. Please see below.
Option 1) Connecting your TV to your Sky box
(when both the TV and Sky Box are located in the same room)
Option 2) Connecting your TV to your Sky box (when your Sky box is located in a different room to the TV)
Using a Sky Remote or a Universal Remote to operate your TV - Sky Remote Control, If you wish to use your
Sky remote to operate the basic functions of your TV, you need to programme a 4 digit code into it. Please note.
you will need the latest Sky Revision 9 remote control as this is the only version that includes the latest software/
fi rmware necessary to operate this model of TV. The code required for this television is 2134. If you wish to
upgrade/replace your existing Sky remote control to the latest version, you can do so on our web site.
Universal Remote Control, If you wish to use a Universal remote control to operate your TV, please refer to the web
site for a full list of codes. (Please note we only have codes for One for All branded remote controls, if you have an
alternative brand of Universal remote, please refer to the manufacturer for the code.)
Sky Box
HDMI cable or
SCART adapter
RF/COAX cable from
Sky Box to 2nd TV
Connect to RF
or RF2 output
on the Sky box
Connect to the
Aerial/RF input
on the 2nd TV
TV Link/Magic Eye
(optional)
2nd TV in
another room
Sky Box
HDMI cable or
SCART adapter
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:33User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:33 12/16/2014 10:13:17 AM12/16/2014 10:13:17 AM
34
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
General I would like to have
louder sound by
connecting additional
speakers.
1) Use the 3.5mm headphone output and a 3.5mm to phono cable
(available separately) to connect to an amplifi er/surround sound system.
Please note this will deactivate the TV’s built in speakers.
2) Connect a Digital Optical Audio cable from the TV’s Digital Optical
Audio output to your amplifi er/surround systems Digital Optical
Audio input.
General Why are some
options in the menu
unavailable and
greyed out.
Some options are only available in certain sources, i.e. HDMI, PC/VGA.
They are unavailable in the other sources where they have no affect.
General Can I stop my TV
turning off after
4hrs?
Yes.
In the time settings menu, scroll down to Auto standby and select OFF.
TV I have tuned in
Digital TV but I am
not receiving any or
all of the channels
and/or the channels I
receive are breaking
up.
1) Check you are in an area that can receive Freeview. Visit
www.freeview.co.uk
2) Check you are using an aerial that is able to receive a good digital
signal. In most cases, you will need an outdoor digital hi-gain/wideband
aerial. In areas that have excellent Freeview coverage, you may be
able to use a loft type aerial but it is highly likely that you will also need
to connect a booster between the back of the TV and the TV aerial wall
socket. Unfortunately, to receive a good enough digital signal, it is not
possible to use a portable/indoor type aerial. This may change once the
analogue signal is switched off in 2012 and the Digital signal strength is
increased.
TV I have re-tuned my
television but when
I switch it off it is not
storing the channels.
Complete a fi rst time installation, please refer to the set-up menu section
of the manual of how to do this.
TV
I cannot fi nd the
Freeview HD
channels
Freeview HD channels found during tuning will be placed in channel
positions above 100. For example, 101 (BBC1 HD), 102 (BBC2 HD) etc.
VCR/DVD
Recorder
I have connected
the TV to my VCR or
DVD Recorder via
SCART but it is not
recording.
In addition to connecting via SCART, you should connect the aerial cable
from the wall socket to your VCR/DVD Recorder and another aerial cable
from the VCR/DVD Recorder to the TV.
Game
Consoles
I have connected
my PS3 to the TV
via HDMI, but I am
not receiving any
pictures or sound on
my TV.
1) Ensure the TVs source is on HDMI
2) Check your settings on your PS3 are as per the PS3 instruction
manual.
Frequently Asked Questions
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:34User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:34 12/16/2014 10:13:17 AM12/16/2014 10:13:17 AM
35
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Frequently Asked Questions
Note:
Supplier may change TV software and on screen
graphics without warning
Game
Consoles
I have connected
my Xbox 360 to the
TV via Component
Cables (Red, Green
& Blue) but I am not
receiving any sound.
Component cables only provide HD Pictures. For the sound you will need
to connect the Red & White audio cables on the Xbox to the Red & White
phono inputs on the rear of the TV. Please refer to the ‘Connections’
pages.
USB Mode I have inserted a
USB Memory Key,
but the TV does not
recognise it.
Ensure the USB Memory Key is formatted to type FAT32.
USB Mode Using a USB
portable hard drive.
If you wish to use a portable hard drive larger than 32GB, please note
that it must be formatted to the FAT32 fi le system in order to operate on
this TV. Windows XP/Vista computers are only capable of formatting up
to 32GB, therefore, you will need a software programme/utility to format
larger hard drives. Please refer to the web site for more information.
USB
Record /
TV models
only
I cannot change the
channel, access the
menu or use the red
button
During Time Shift you cannot change the channel, access the menu or
use the red button
USB
Record /
TV models
only
When using the
USB to record the
picture ‘breaks up’
or experience loss of
sound.
Check the USB Memory Stick meet the minimum requirements of Read
Speed - 20 MB/s (Mega Byte Per Second), Write Speed - 6 MB/s (Mega
Byte Per Second)
System
Lock
I have changed the
password on the
television and now
forgotten it.
There is a master password of 4711, to gain access to the TV menu and
reset the normal password.
Freeview
HD
I cannot access all
Freeview channels
Some data channels for Freeview can only be obtained when the TV
receives an internet connection.
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:35User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:35 12/16/2014 10:13:17 AM12/16/2014 10:13:17 AM
36
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Technical Specification
Additional Technical Information
RF
75 ohm Antenna / Analog / DVB
Video Inputs 3 x HDMI, 1 x USB, 1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr, 1 x Component/YPbPr, 1 x VGA/PC
Sound Inputs
1 x 3.5mm jack for PC audio input
Sound Outputs 1 x Digital Optical Audio output , 1 x 3.5mm headphone jack
Speaker / Amplifi er Watts (RMS) 2 x 10W / 2 x 8W
Dimensions including stand (mm)
1122W x 323H x 715D
Net weight
18.6kg
Energy Consumption Info
Voltage and power consumption
110-240v 50 / 60Hz
49 / 70 / 90 W (ecomode/standard/max)
EEI - A++ (Energy Rating)
Wallmounting VESA
300 x 200 (mm)
Supplier
Bush
Model ID
50/238F
Energy effi ency class A++
Visible screen size (diagonal) 127 cm / 50 inches
On mode model average power consumption 49 W
Annual energy consumption *1 72 kWh
Standby power consumption *2 <0.5 W
Off mode power consumption
0 W
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption
will depend on how the television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Product Fiche
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:36User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:36 12/16/2014 10:13:18 AM12/16/2014 10:13:18 AM
37
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
Technical Specification
Compatible fi les in USB Mode
Media File Ext.
Video Decoder
Remark
Video Audio
Movie
.mpg/.mpeg
/.dat
MPEG-1, MPEG-2
MP3, WMA,AAC,
LPCM,DTS(DMP)
IMA-aDPCM/MS-A
DPCM,LBR(cook),
G711A/mu-law
Max Solution: 1920×1080
Max Data Rate: 40 Mbps
.ts/.trp/.tp/.
m2ts
MPEG-2, H.264,VC1,AVS
.vob MPEG-2
.mp4
.rm/.rmvb Rm codec
.mkv
MPEG-1, MPEG-2, MPEG-4,
H.264
.avi
MPEG-2, MPEG-4,
Xvid, H.264
Motion JPEG JPEG
Max Solution: 640×480
Max Data Rate: 10 Mbps
.asf,wmv VC1
Max Solution: 1920×1080
Max Data Rate: 40 Mbps
.flv/.swf
H.264, AVC, Sorenson
H.263
Music
.mp3 --
MPEG1/2 (Layer1
Layer2Layer3)
Sample
Rate: 16KHz~48KHz
BitRate: 32K~448Kbps
.wma/.asf --
WMA
BitRate: 128Kbps~320Kbps
Sampling rate : 8KHz-48KHz
WMA pro
BitRate: <768Kbps
Sampling rate : ~96KHz
.ogg -- OGG Sample Rate: ~48KHz
.m4a/.aac -- AAC HEAAC
Sample Rate: 8K~48KHz
Bit Rate: 24K~384Kbps
Photo
.jpg/
.jpeg
Progressive JPEG Max Resolution: 1024×768
Baseline JPEG
Max Resolution:
1920×8×1088×8
.bmp BMP
Max Resolution:
9600×6400
.png
Non-Interlaced
Max Resolution:
9600×6400
Interlaced Max Resolution: 1200×800
MPEG-4, Xvid, H.264
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:37User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:37 12/16/2014 10:13:18 AM12/16/2014 10:13:18 AM
BUS/MAN/0016
User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:40User Guide - BUSH - 50-238F - BUS-MAN-0016.indd Sec1:40 12/16/2014 10:13:18 AM12/16/2014 10:13:18 AM
