36
LINK MODE (CuddeLink Mode)
LINK MODE sets the camera’s CuddeLink mode. Choices are OFF,
HOME, REMOTE, REPEATER. Press UP or DOWN to select, then
press MORE to connue programming addional CuddeLink
sengs.
OFF – use this if you do not want this camera to be part of a
CuddeLink network. The CuddeLink radio will be disabled.
HOME – Set Home on the camera that collects images. Only 1
camera can be set to HOME.
REMOTE – Set Remote on the cameras that take pictures and
transmit the pictures to the HOME camera.
REPEATER – use this when you need a repeater to transmit
images, but you do not want the camera to record images. Refer
to REPEATER secon later in this manual.
LINK LOC (CuddeLink Locaon)
LINK LOC (LOCATION) assigns a unique number to each camera on
the network. We strongly recommend each camera has a unique
number. Refer to secon CAMERA NAMING for our
recommendaons on how to use this seng.
LINK CHAN (CuddeLink Channel)
LINK CHAN (CHANNEL) sets the radio frequency the cameras use
to transmit images. All cameras on your network must be set to
the same channel. CuddeLink has channels numbered 1-1 thru 16-
31. You can choose any number you like, but do not choose a
channel number used by another network in the immediate area,
and make sure both numbers you select are unique across
neighboring networks. For example, if you are using 01-02 on one
network do not use 01-03 on a neighboring network, both
numbers should be unique.