1
water care
The Water care page will help you set up your ideal ltration and heating settings.The Water care page will help you set up your ideal ltration and heating settings. Choose,
set or modify one of the 5 suggested modes depending on your needs at any given time.
Away from home
In this mode the
spa will always be in
economy; the set point
will be reduced
by 6° C.
Beginner
The spa will never be
in economy mode
and will be ltering
according to the pack's
low level conguration.
Energy Savings
The spa will be in
economy mode during
the peak hours of the
day and resume normal
mode on
the weekend.
Super Energy
The spa will always
be in economy mode
during peak hours,
every day of the week.
Weekender
The spa will be in
economy mode from
Monday to Friday, and
will run normally on
the weekend.
modifying water care schedules
water care
To modify a Water care category, touch the pen icon
at the right end of the desired water care to open the
selected Water Care menu.
In Economy mode, the set point will be reduced by
6°C, which means that the heating system will not be
engaged unless the temperature falls to 6°C below the
spa's set temperature.
The ltration schedule show on the screen will be applied
to the main ltration pump, most likely pump 1. If your
spa uses a circulation pump congured to run 24 hours,
the screen will show you the purge setting instead of
ltration.
The purges are pre-programmed for a x number of
minutes, therefore the duration will be set to N/A on the
screen, and only the start time can be modied.
economy
Touch the Economy tab to change the economy
schedule. You can add economy schedules by
touching the orange line labelled "Add Economy" .
To delete a schedule, touch the garbage can icon at
the right end of the desired line.
You can modify the programmed schedules by
selecting one and adjusting the schedule.
You have several possibilities for the schedule
(Mon-Fri, weekend, every day, or single days).
The schedules will be repeated every week.
The time and duration are set in 30 minute
increments.
purges
Touch the Purge tab to change the purge
settings. You can add purges by touching the
orange line labelled "Add purge time".
To delete a schedule, touch the garbage can icon at
the right end of the desired line.
lter cycles
Touch the Filter cycle tab to change the lter cycle
schedules. You can add ltration schedules by
touching the orange line labelled "Add lter cycle".
To delete a schedule, touch the garbage can icon at
the right end of the desired line.
Once you have set the schedule, press "Conrm".
If you don't want to keep any changes, press "Cancel"
or use the calendar icon to go back.
You can modify the programmed purges by selecting one
and adjusting the schedule.
You have several possibilities for the schedule (Mon-Fri,
weekend, every day, or single days). The schedules will be
repeated every week. The time and duration are set in 30
minute increments. Once you have set the purge,
press "Conrm". If you don't want to keep changes,
press "Cancel" or the calendar icon.