HITCH MEASUREMENTS
STRAIGHTSHOT
HITCH EXTENDER
PRODUCTS A B C D E B C
OnRamp™ 2" 76 mm Min. 130 mm Max. 130 mm Max. 254 mm 38 mm Min. 184 mm 184 mm
HangOver™ 6 76 mm Min. 203 mm Max. 330 mm Max. 305 mm Min. 38 mm Min. NA* NA*
HangOver™ 4 76 mm Min. 203 mm Max. 330 mm Max. 254 mm Min. 38 mm Min. 184 mm 184 mm
BackSwing™ 73 mm Min. 208 mm Max. 165 mm Max. 254 mm 38 mm Min. NA* NA*
HoldUp™ 2" 73 mm Min. 229 mm Max. 248 mm Max. 254 mm 38 mm Min. 184 mm 184 mm
HoldUp™ EVO 2" 76 mm Min. 127 mm Max. 216 mm Max. 254 mm 38 mm Min. 184 mm 184 mm
SingleSpeed™ 41 mm Min. 197 mm Max. 304 mm Max. 254 mm 69.85 mm Min. NA* NA*
FullSwing™ 76 mm Min. 222 mm Max. 171 mm Max. 254 mm 38 mm Min. 184 mm 184 mm
FourTimer™ 70 mm Min. 340 mm Max. 368 mm Max. 254 mm 38 mm Min. NA* NA*
TwoTimer™ 48 mm Min. 318 mm Max. 316 mm Max. 254 mm 50 mm Min. 184 mm 184 mm
LongHaul™ 79 mm Min. 111 mm Max. 260 mm Max. 254 mm 38 mm Min. 184 mm 184 mm
BackRoad™ 50 mm Min. 225 mm Max. 225 mm Max. 254 mm 38 mm Min. NA* NA*
DoubleDown™ 50 mm Min. 232 mm Max. 229 mm Max. 254 mm 50 mm Min. NA* NA*
DoubleDown™
Ace 4&5
50 mm Min. 232 mm Max. 229 mm Max. 254 mm 50 mm Min. NA* NA*
LongArm™ 70 mm Min. 216 mm Max. 254 mm Max. 254 mm 38 mm Min. NA* NA*
Interior
Backstop
edge of
spare tyre
Centre of
Mounting
Hole
Centre of
Mounting
Hole
Edge of
Receiver
Centre of
Mounting
Hole
Centre of
Mounting
Hole
Bumper
Edge
Edge of
spare tyre
Centre of
Mounting
Hole
A
E
◂▸
B
C
A
MEASUREMENT A
An obstacle inside or behind the
hitch can be present.
MEASUREMENT C
A spare-tyre may interfere with
the install of a rack.
MEASUREMENT B
Make sure the bumper will not
interfere with the hitch rack.
MEASUREMENT D MEASUREMENT E
Centre of
Mounting
Hole
D
Level Ground
HITCH MEASUREMENTS
Measurement D is a recommended minimum on this product. Using Yakima Hitch mounted bike racks
on vehicles with a pinhole to ground distance less than the minimum recommended increases the risk of
the bikes or rack striking the ground while in use.
* NA - Not compatible and should not be used with the StraightShot hitch extension
65 mm
184 mm
325 mm
160 mm
76 mm
HITCH EXTENSION MEASUREMENTS
The hitch extension gives an additional 184mm of clearance.
For models that come with hitch adapters, please ensure that the entire adapter is
fully inserted into the hitch receiver.
Check for any limitations around short hitches. The maximum internal dimensions of
the hitch receiver should be 52mm horizontal or vertical. Products may cause damage
to, or detach from, a hitch receiver bigger than that.
NOTES
Yakima is a registered trademark of Yakima Group of companies
Last updated 5/2022