STSC6 Blueprint References | V.2021.05.28
© 2021 Board of Certied Safety Professionals
BLUEPRINT
REFERENCES
STSC6
The questions that appear on the STSC examination are written by subject matter experts,
and every question is supported by a published reference. The following is a list of references
that were frequently used during development of the STSC examination. This is not intended
as a comprehensive list of all materials available to STSC candidates and should not be
intended as a guaranteed means of passing the exam. Candidates are also strongly advised to
become familiar with industry regulations, standards, and practices in preparing for the STSC
certication examination.
Title & Auxiliary Information
Accident Investigation Techniques; 2nd Edition
Oakley, J. S. (2012). Des Plaines, IL: American Society of Safety Engineers.
Accident Prevention Manual for Business & Industry: Engineering and Technology; 14th Edition
Hagan, P. E., Montgomery, J. F., et al. (2015). Itasca, IL: National Safety Council.
Accident Prevention Manual for Business & Industry: Environmental Management; 2nd Edition
Krieger, G. R. (2000). Itasca, IL: National Safety Council.
Accident Prevention Manual for Business & Industry: Security Management
Lack, R. W. (1997). Itasca, IL: National Safety Council.
Basic Concepts of Industrial Hygiene
Scott, R. (1997). Boca Raton, FL: CRC Press LLC.
BCSP Code of Ethics
Board of Certied Safety Professionals. (2020). Retrieved from http://www.bcsp.org/Portals/0/Assets/DocumentLibrary/BCSPcodeofethics.pdf
Construction Safety Management and Engineering; 2nd Edition
Hill, D. C. (2014). Des Plaines, IL: American Society of Safety Engineers.
Construction Safety Planning
MacCollum, D. (1995). New York, NY: John Wiley & Sons, Inc.
Emergency Planning and Management: Ensuring Your Company’s Survival in the Event of a Disaster
Stringeld, W.H. (2000). Rockville, MD: Government Institutes.
Fire Safety Management Handbook; 3rd Edition
Della-Giustina, D. E. (2014). Boca Raton, FL: Taylor & Francis Group, LLC.
Fundamental Principles of Occupational Health and Safety; 2nd Edition
Alli, B.O. (2008). Geneva, Switzerland: International Labour Organization.
Fundamentals of Industrial Hygiene; 6th Edition
Plog, B. A. & Quinlan, P. (2012). Itasca, IL: National Safety Council.
Globally Harmonized System of Classication and Labelling Chemicals; 5th Revised Edition
American National Standards Institute, Inc. (2013). Des Plaines, IL: American Society of Safety Engineers.
Handbook of Rigging: Lifting, Hoisting, and Scaolding for Construction and Industrial Operations; 5th Edition
MacDonald, J. A., Rossnagel, W. E., et al. (2009). New York, NY: The McGraw-Hill Companies, Inc.
Introduction to Fall Protection; 4th Edition
Ellis, J. N. (2011). Plaines, IL: American Society of Safety Engineers.
Job Hazard Analysis: A Guide to Identifying Risks in the Workplace
Swartz, G. (2001). Lanham, MD: Government Institutes.
Occupational Health and Safety Management: A Practical Approach; 3rd Edition
Reese, C. D. (2016). Boca Raton, FL: Taylor & Francis Group, LLC.
Occupational Safety and Health for Technologists, Engineers, & Managers; 8th Edition
Goetsch, D. L. (2015). Upper Saddle River, NJ: Pearson Education, Inc.
Safety Professional’s Reference & Study Guide; 3rd Edition
Yates, W. D. (2020). Boca Raton, FL: Taylor & Francis Group, LLC.
Supervisors’ Safety Manual; 11th Edition
National Safety Council. (2018). Itasca, IL: National Safety Council.
Board of Certied Safety Professionals
E: [email protected] | W: BCSP.ORG