The ENTRY Media/Navigation (HU-B) is the low line business version of the navigation system and was
introduced in 3/2014. This uses map North America ROUTE
For details on these various head units please reference SI B65 09 16.
These head units use a different way of loading navigation system road map data than previous head units
and will not rely on DVD discs to load the maps.
For the US market, all vehicles will come pre-loaded from the factory with the latest navigation system road
map database version that was available at the time of vehicle production.
Therefore, there will be no physical copy of the navigation system road map data media DVD set or USB
stick placed in these vehicles at the Vehicle Distribution Center (VDC).
Note: Additionally, all replacement head unit parts come with a pre-loaded version of the current
available navigation system road map database installed.
IMPORTANT: Additional copies or earlier NAV road map database versions cannot be ordered
individually! Therefore, please take special care to archive the HU-H NAV road map DVD sets!
The NAV road map data is also installed into the Network Attached Storage (NAS). From there it then can be
installed onto the HU-H in the vehicle, using the Integrated Service Technical Application for Programming
(ISTA/P or ISTA 4).
For installation of the navigation system road map data media onto the Network Attached Storage (NAS), or
information on how to download the map onto a USB stick and then into a vehicle please reference SI B09
04 09
When loading the Navigation Map into the vehicle utilizing a USB stick please observe the following
recommendations:
• See procedure in attached document B651312 Attachment A
• Use either a 32GB or 64GB USB stick for the map
• The USB stick must use FAT32 formatting
• A high volume dealership may wish to purchase multiple USB sticks so they can download the latest
map(s) and have them immediately available for upload into a customer’s vehicle. This will save time
instead of downloading map(s) as needed onto USB stick immediately prior to use.
• Connect the USB stick into the USB connector in the vehicle
There may be more than one USB connection within the vehicle
where the stick can be inserted (center console (arrow),
glovebox). However, some vehicles may only recognize the map
in one of the USB ports, so try both connections.
• The NBT and ENTRY head units will prompt for the 20 digit enabling code to be installed via the IDrive
AFTER the USB stick is installed.
• The NBT EVO head unit can only load an enabling code via ISTA or ISTA 4 and this cannot be
manually entered via the IDrive.
Page 2 of 5TIS Service Bulleti
8
5
201
https://www.bmwtis.net/tiscode/cg
-
in/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/508...